From: Jason Cash (cash2001@swbell.net)
Date: Tue Nov 19 2002 - 20:36:27 GMT-3
I am working on the boson lab OSPF 1 and one of the instructions is
such:
Each router should only show the described mapping when 'sh frame map'
is typed.
However, when I typoe the command on R4, it lists the following:
01:15:49: %SYS-5-CONFIG_I: Configured from console by consolerame map
Serial0 (up): ip 153.1.134.1 dlci 401(0x191,0x6410), static,
broadcast,
CISCO, status defined, active
Serial0 (up): ip 153.1.134.3 dlci 401(0x191,0x6410), static,
broadcast,
CISCO, status defined, active
Serial0 (up): ip 153.1.21.2 dlci 402(0x192,0x6420), dynamic,
broadcast,, status defined, active
Now I only have two frame map statements. Why is it showing the DLCI
402? Here is the config of R$ and the frame switch:
R4
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
service tcp-small-servers
!
hostname r4
!
!
ip subnet-zero
no ip domain-lookup
!
!
!
!
interface Loopback0
ip address 153.1.104.1 255.255.255.0
!
interface Ethernet0
ip address 153.1.43.44 255.255.255.128
no ip route-cache
no ip mroute-cache
no keepalive
!
interface Serial0
ip address 153.1.200.4 255.255.255.0
encapsulation frame-relay
no ip route-cache
ip ospf network point-to-multipoint
no ip mroute-cache
frame-relay map ip 153.1.134.1 401 broadcast
frame-relay map ip 153.1.134.3 401 broadcast
frame-relay lmi-type cisco
!
interface Serial1
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
router ospf 1
log-adjacency-changes
network 153.1.104.0 0.0.0.255 area 0
!
ip classless
no ip http server
!
!
alias exec shi sh ip int brief
!
line con 0
exec-timeout 60 0
line aux 0
transport input all
line vty 0 4
login
!
end
FS
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname fs
!
boot system flash c4500-jk8s-mz.122-12.bin
!
ip subnet-zero
!
frame-relay switching
!
!
!
!
interface Ethernet0
ip address 192.168.0.9 255.255.255.0
media-type 10BaseT
!
interface Ethernet1
no ip address
shutdown
media-type 10BaseT
!
interface Serial0
no ip address
encapsulation frame-relay
no fair-queue
clockrate 500000
frame-relay intf-type dce
frame-relay route 102 interface Serial1 201
frame-relay route 103 interface Serial2 301
frame-relay route 104 interface Serial3 401
!
interface Serial1
no ip address
encapsulation frame-relay
clockrate 500000
frame-relay intf-type dce
frame-relay route 201 interface Serial0 102
frame-relay route 203 interface Serial2 302
frame-relay route 204 interface Serial3 402
!
interface Serial2
no ip address
encapsulation frame-relay
clockrate 500000
frame-relay intf-type dce
frame-relay route 301 interface Serial0 103
frame-relay route 302 interface Serial1 203
frame-relay route 304 interface Serial3 403
!
interface Serial3
no ip address
encapsulation frame-relay
clockrate 500000
frame-relay intf-type dce
frame-relay route 401 interface Serial0 104
frame-relay route 402 interface Serial1 204
frame-relay route 403 interface Serial2 304
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface BRI1
no ip address
encapsulation hdlc
shutdown
!
interface BRI2
no ip address
encapsulation hdlc
shutdown
!
interface BRI3
no ip address
encapsulation hdlc
shutdown
!
interface BRI4
no ip address
encapsulation hdlc
shutdown
!
interface BRI5
no ip address
encapsulation hdlc
shutdown
!
interface BRI6
no ip address
encapsulation hdlc
shutdown
!
interface BRI7
no ip address
encapsulation hdlc
shutdown
!
ip classless
no ip http server
ip pim bidir-enable
!
!
alias exec shi sh ip int brief
!
line con 0
exec-timeout 60 0
line aux 0
line vty 0 4
login
!
end
I am also rcv'ing the following msgs on R2 while working on the Boson
OSPF1 lab. Is there a way to disregard the msgs with a router
statement?
00:40:02: %OSPF-4-ERRRCV: Received invalid packet: mismatch area ID,
from backbone area must be virtual-link but not found from 153.1.134.3,
Serial0
Also, are JPG scan acceptable on this forum as it would be much easier
to send in a topology pic instead of doing it in ascii.
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:07 GMT-3