From: barroyo@sztele.com
Date: Tue Nov 19 2002 - 08:14:06 GMT-3
Hi all,
For your info:
The problem has been solved fixing supervisor ports ( to 100 full
duplex) and equipment to be connected was a Passport 8600 with
redundante supervisors.
So, it seems now all is working fine.
Regards and thanks.
Juan Faure Ferrer
14/11/02 11:37 a.m.
Para: Beatriz Arroyo Cortazar/Telematica/SZT@SZTELE
cc:
Asunto: RE: PROBLEM WITH MAC-ADDRESS MAPPING IN CATALYST 3548 XL
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
----- Remitido por Juan Faure Ferrer/Telematica/SZT con fecha 14/11/02
11:28 -----
Tan Yong How Darry AERADIO <darrytan@aeradio.com.sg>
14/11/02 11:22
Para: "'jfaure@sztele.com'" <jfaure@sztele.com>
cc:
Asunto: RE: PROBLEM WITH MAC-ADDRESS MAPPING IN CATALYST 3548 XL
Hi,
1) did you see any LED on? you should be using a X cable, since you are
using FE port 3.
2) Try changing a different cable, a working one :)
3) Try changing to different port too,
I had configured the passport 8000 to cisco devices before, so it should
not
be a problem. In trunking, make sure to use dot1q. All the best!
-----Original Message-----
From: jfaure@sztele.com [mailto:jfaure@sztele.com]
Sent: Thursday, November 14, 2002 6:02 PM
To: ccielab@groupstudy.com
Subject: PROBLEM WITH MAC-ADDRESS MAPPING IN CATALYST 3548 XL
Hi,
I have a customer who wants to connect Nortel equipment (8K) to 3548
Catalyst.
First problem: we are not able to see the MAC addres on 3548 port (we have
tried also fixing speed/duplex ). So we have no IP connectivity for this
equipment.
Second problem: Trying to define static mac with command:
mac-address-table static 0004.dc99.6bf4 FastEthernet0/3 vlan 20
Reviewvng the show mac inter fast0/x , the mac above appears on all vlan
20
ports...but, this is not the behaviour needed.
Also, when a clear mac is made in order to clean the mac table, the comand
mac-addres-table disappear from running config.
The IOS version of the 3548XL 12.05.3WC1.
Any help should be appreciated??
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:06 GMT-3