From: miken (miken@sisna.com)
Date: Tue Nov 19 2002 - 04:52:49 GMT-3
I believe the config-register is stored in NVRAM. So in theory, if you
bypass the startup config, you may default to the standard config-register
settings. Haven't tried it though to know for sure. Have you tried booting
into rommon(control-break sequence) and then stepping through the confreg
steps?
http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1831/products_comm
and_summary_chapter09186a0080087baf.html#xtocid43127http://www.cisco.com/en/
US/partner/products/sw/iosswrel/ps1831/products_command_summary_chapter09186
a0080087baf.html#xtocid43127HTH,Mike----- Original Message -----
From: "Robert Massiache" <robert2140@hotmail.com>
To: <ccielab@groupstudy.com>
Cc: <cisco@groupstudy.com>; <ccie@groupstudy.com>
Sent: Monday, November 18, 2002 7:39 PM
Subject: Confreg problem...help!
> Hi,
> I got a mc3810 router and was running perfect. Sometime ago I mistakenly
> typed a confreg value which I do not remeber exactly but I know it was not
a
> relevant one. I was actually practicing with the confreg entries.
>
> What happened was that after I just rebooted the router I lost the console
> screen. I tried with all sorts of console port values like changing the
> baud-rate, start stop bit etc.
>
> I found it was responding to 1200 baud speed but all I could find is some
> corrupted and garbled ascii characters on the Teraterm. Same is the case
> with hyprterm.
>
> Any helpers please...
>
> thanks
>
>
>
>
>
>
> _________________________________________________________________
> Add photos to your e-mail with MSN 8. Get 2 months FREE*.
> http://join.msn.com/?page=features/featuredemail
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:06 GMT-3