From: Jay (ccienxtyear@hotmail.com)
Date: Mon Nov 18 2002 - 21:31:13 GMT-3
you need to apply it on the vty lines and not on the loopback interface.
line vty 0 5
access-class 102 in
-Jay
----- Original Message -----
From: "Nate Kleven" <cciemail@intellinet.ws>
To: <ccielab@groupstudy.com>
Sent: Saturday, November 16, 2002 10:28 PM
Subject: ACL's on Loopbacks?
> I was asked to create an acl for a loopback interface that only allowed
> Telnet traffic from particular ip's. That was not working for me, so I
got
> frustrated and denyed all traffic. However, I am still able to telnet to
> it, even with the folling config.
>
> !
> interface Loopback0
> ip address 10.10.10.1 255.255.255.0
> ip access-group 102 in
> !
> access-list 102 deny ip any any
>
>
> Has anyone run into this before?
>
>
> NK
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:05 GMT-3