From: Bob Rech (brech@kc.rr.com)
Date: Mon Nov 18 2002 - 14:46:14 GMT-3
To make this work is ugly.
But having said that you can create
On the area 0 and area 10 routers
area 10 virtual-link <neighbor ospf ID>
On the area 10 and area 20 routers
area 20 virtual-link <neighbor ospf ID>
I did just put this together and the routes from area0 and area 30 do get
propagated all the way across. This is kind of like a vitual area through
another virtual area, I am not sure if this is a supported configuration,
but it appears work. All the virtual links come to FULL and all routers show
an interface in area 0.
----- Original Message -----
From: "Bashir Sulaiman" <bashir.sulaiman@netwise.co.uk>
To: "'Tasuka Amano Hsu'" <tasuka@mac.com>; "'ccielab Groupstudy'"
<ccielab@groupstudy.com>
Sent: Monday, November 18, 2002 9:54 AM
Subject: RE: OSPF Virtual link cross Multi area
> Tasuka,
>
> As long as you have a valid virtual-link to area 0 from area 20, then you
> can "virtual-link" to the area 20 router with the link to area 0.
> Any contrary views?
>
> Bashir
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Tasuka Amano Hsu
> Sent: 18 November 2002 13:42
> To: ccielab Groupstudy
> Subject: OSPF Virtual link cross Multi area
>
> If a network topology like below:
>
> Area 0---Area 10---Area 20--Area 30
>
> How to make the virtual linke from Area 30 to connect to Area 0
>
> And I could make a virtual link for area 20 to through area 10 to
> connect to area 0 but how about area 30 ?
>
> Best Regards
>
> Tasuka
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:04 GMT-3