From: Minihane Kevin-kminih01 (Kevin.Minihane@motorola.com)
Date: Mon Nov 18 2002 - 06:49:08 GMT-3
Hi John
Can you supply the configs
Thanks
-----Original Message-----
From: John Tafasi [mailto:johntafasi@yahoo.com]
Sent: 18 November 2002 09:40
To: ccielab
Subject: ISDN dialer load-threshold
My router below is trying to fire the second B channel to add more bandwidth
to an open connection but it fails every time it tries to do so. I receive
the following message. Can some one tell me why the call is being rejected.
Thanks
22:58:07: ISDN BR0: TX -> SETUP pd = 8 callref = 0x06
22:58:07: Bearer Capability i = 0x8890
22:58:07: Channel ID i = 0x83
22:58:07: Keypad Facility i = '8358661'
22:58:07: ISDN BR0: RX <- DISCONNECT pd = 8 callref = 0x86
22:58:07: Cause i = 0x8081 - Unallocated/unassigned number
22:58:07: ISDN BR0: TX -> RELEASE pd = 8 callref = 0x06
22:58:07: ISDN BR0: RX <- RELEASE_COMP pd = 8 callref = 0x86
22:58:07: ISDN BR0: Setup was rejected, cause = 60
R5-2503#
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:04 GMT-3