From: Nate Kleven (cciemail@intellinet.ws)
Date: Sun Nov 17 2002 - 22:19:24 GMT-3
Default Hello Interval for Point-to-point network type is 10(refer below).
The default hello interval for point-to-multipoint is 30 seconds.
Therefore, in order to form an adjaceny between PTP and PTM, you need to
change one to match the other. I changed the PTP to 30 and it came up. :)
Serial0/0.1 is up, line protocol is up
Internet Address 120.20.12.2/29, Area 0
Process ID 2, Router ID 2.2.2.2, Network Type POINT_TO_POINT, Cost: 64
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:05
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 6
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 1.1.1.1
Suppress hello for 0 neighbor(s)
You even said this yourself, take a look at this email from you:
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:03 GMT-3