From: eric (namaste@pacbell.net)
Date: Sat Nov 16 2002 - 18:31:27 GMT-3
You have 2 issues to address here take a look at the timers on the diff.
interfaces and then address any DR issues that might come up.
~e
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Nate Kleven
Sent: Saturday, November 16, 2002 12:33 PM
To: 'CCIElab@groupstudy.com'
Subject: OSPF On NBMA with a twist
R2
/ \
/ \
/ \
R4 R3
Hub and Spoke Topology
R2 Has a PVC to R4 and R3
- R2/R3/R4 Share the 10.10.10.0/27 Network
- R4 Must be configured using a Physical Interface
- R3 & R2 Must be configured using Sub-interfaces
- R2's Serial Subinterface must be configured as a multipoint interface, not
a Non-broadcast.
- You may not use the "IP OSPF NETWORK" command on R3
I have not been able to get this working and meet all th requirements.
Anyone out there seen this before?
Thanks in advance.
Nate
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:02 GMT-3