From: Connelly.Sylvester@btinternet.com
Date: Sat Nov 16 2002 - 17:53:15 GMT-3
Thanks Chuck, I keep playing with different settings.......
----- Original Message -----
From: "Chuck Church" <cchurch@optonline.net>
To: "Connelly.Sylvester@btinternet.com" <connelly.sylvester@btinternet.com>;
"Chris Young" <csyoung@speakeasy.net>; <ccielab@groupstudy.com>
Sent: Saturday, November 16, 2002 7:53 PM
Subject: Re: Trouble with a 3620
> Danny,
>
> I've had 2500s that acted like that. Did you try a newer version of
> hyper terminal? Did you try playing with the flow control settings and
> turning off the FIFO buffers for your com port, which I think you'll find
> under advanced somewhere?
>
> Chuck Church
> CCIE #8776, MCNE, MCSE
>
>
> ----- Original Message -----
> From: "Connelly.Sylvester@btinternet.com"
> <connelly.sylvester@btinternet.com>
> To: "Chris Young" <csyoung@speakeasy.net>; <ccielab@groupstudy.com>
> Sent: Saturday, November 16, 2002 11:32 AM
> Subject: Re: Trouble with a 3620
>
>
> > Chris,
> >
> > It seems as through the console is faulty, it boots up ok with all the
> > boot/system messages, but I cannot type or configure anything on the
> console
> > port.
> >
> > All has to be inputed via the AUX port.
> >
> > God help the day when I wr erase in error.
> >
> > Thanks for you help.
> >
> > Regards,
> >
> > Danny
> > ----- Original Message -----
> > From: "Chris Young" <csyoung@speakeasy.net>
> > To: "'Connelly.Sylvester@btinternet.com'"
> > <connelly.sylvester@btinternet.com>; <ccielab@groupstudy.com>
> > Sent: Saturday, November 16, 2002 2:46 AM
> > Subject: RE: Trouble with a 3620
> >
> >
> > > Danny,
> > >
> > > It sounds like either the config register is set to some odd-ball
> > > setting for the console port baud settings or the console port is just
> > > dead.
> > >
> > > Do you get anything to echo on the screen when you try 9600,8,n,1?
> > >
> > > Chris
> > >
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> > > Connelly.Sylvester@btinternet.com
> > > Sent: Friday, November 15, 2002 8:52 PM
> > > To: ccielab@groupstudy.com
> > > Subject: Trouble with a 3620
> > >
> > > Is there an expert out there that knows about the 3620's. I have a
> > > problem
> > > for some unkown reason the console port is not working, I can only use
> > > the
> > > AUX port of configuration.
> > >
> > > Any help will be appriciated?
> > >
> > > Regards,
> > >
> > > Danny Sylvester
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:02 GMT-3