From: Jeff Kesemeyer (jkesemey@bellsouth.net)
Date: Fri Nov 15 2002 - 22:09:27 GMT-3
Point-to-Multipoint and Loopbacks will generate host routes /32 in the
routing table.
Three ways to get a loopback interface into OSPF with a real subnet
mask:
1. "ip ospf network point-to-point" on a loopback
2. putting loopback in certain areas so you can summarize them using
"area range"
3. redistribute connected with restrictive list.
Jeff Kesemeyer
CCNP, CCDP, MCSE, CNE
www.bradshawlabs.com
"Your CCIE Rack Rental Source"
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nate Kleven
Sent: Friday, November 15, 2002 6:05 PM
To: 'CCIElab@groupstudy.com'
Subject: Loopback Interface and /32 Routes
Is there a way for me to keep loopback interfaces from generating /32
routes? I don't have the interfaces that I need for a lab, so I have
been
using loopbacks. They are clogging the routing table. Any ideas?
Thanks
Nate
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:01 GMT-3