From: Gene_Thorne@doh.state.fl.us
Date: Thu Nov 14 2002 - 10:10:09 GMT-3
Good idea. So far I have tried only a straight-through DB9-DB25 serial. I'll
dig up a null modem cable and give it a shot.
-Gene
-----Original Message-----
From: Chuck Church [mailto:cchurch@optonline.net]
Sent: Wednesday, November 13, 2002 4:36 PM
To: Gene_Thorne@doh.state.fl.us; ccielab@groupstudy.com
Subject: Re: HP Ethertwist Plus info?
Gene,
Not sure about the hub features, but what kind of cable did you try to
connect to it with? A lot of 3Coms use a null modem cable, not a rollover
cable like Cisco's use. Maybe you're just using the wrong cable. Laplink
cables work also.
Chuck Church
CCIE #8776, MCNE, MCSE
----- Original Message -----
From: <Gene_Thorne@doh.state.fl.us>
To: <ccielab@groupstudy.com>
Sent: Wednesday, November 13, 2002 11:22 AM
Subject: OT: HP Ethertwist Plus info?
> I recently acquired a used 19" rack for my lab gear and mounted in it was
an
> HP Ethertwist Plus hub, model 28699a. I have searched the HP website for a
> manual or other info about it and all I can find is a firmware update, a
mib
> file and that it is a "managed hub". There is an RS232 console port, but
it
> doesn't respond to my terminal program. Anyone know where I might find
some
> info about this box?
> -Thanks
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:59 GMT-3