From: Brian McGahan (brian@cyscoexpert.com)
Date: Wed Nov 13 2002 - 17:31:47 GMT-3
Wes,
If RouterA and RouterC were the same router, then yes there is a
way to do this. This feature is called multichassis multilink PPP.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
fdial_c/fnsprt9/dafmppp.htm
I don't think it will work in this particular case with 4
routers though. However, if they're just p2p routed links, your routing
protocol should be responsible for the load balancing.
What exactly are you trying to accomplish?
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
Voice: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Kumar, Senthil
> Sent: Wednesday, November 13, 2002 1:52 PM
> To: Nathan Kleven; 'Joe A'; 'wesclark'; 'ccielab@groupstudy.com'
> Subject: RE: Multilink PPP between different routers
>
> enable cef ..does it for you.
>
> -----Original Message-----
> From: Nathan Kleven [mailto:nkleven@intellinet.ws]
> Sent: 13 November 2002 18:47
> To: 'Joe A'; 'wesclark'; 'ccielab@groupstudy.com'
> Subject: RE: Multilink PPP between different routers
>
>
> Redundancy and load balancing?
>
> __________
>
> Nate Kleven
>
> Senior Network Engineer, CCNP Voice Access, MCSE
>
> Expanets
>
> 6020 So 190th ST
>
> Kent, WA 98032
>
> (206)219.6135
>
> "Experienced at Networked Solutions"
>
>
>
> -----Original Message-----
> From: Joe A [mailto:groupstudy@comcast.net]
> Sent: Wednesday, November 13, 2002 9:46 AM
> To: 'wesclark'; ccielab@groupstudy.com
> Subject: RE: Multilink PPP between different routers
>
>
> Why would you want to do this?
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> wesclark
> Sent: Wednesday, November 13, 2002 6:12 AM
> To: ccielab@groupstudy.com
> Subject: Multilink PPP between different routers
>
>
> Hi,
>
>
> Is it possible to configure multilink PPP bundle for links terminated
on
> different routers. scenario like this..
>
>
> RTA ------------serial link 1 (Leased Line)-----------------RTB
>
>
> RTC--------------serial link 2 (Leased Line)----------------RTD
>
>
> router A and router C at one location ,router B and D at other
location. I
> want to bundle these two links together usin PPP.
>
>
> Any suggestions.
>
>
> Wes
> Get Your Private, Free E-mail from Indiatimes at
> http://email.indiatimes.com
> Buy Music, Video, CD-ROM, Audio-Books and Music Accessories from
> http://www.planetm.co.in
>
>
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:59 GMT-3