From: dennis.d.adekola@britishairways.com
Date: Wed Nov 13 2002 - 13:26:01 GMT-3
Hi Dayo,
What you need is a "clear ip nat trans * "
This should claer all your dynamic translations
Dennis
dayo olabisi <ccie_student@yahoo.com>@groupstudy.com on 13/11/2002 14:17:24
Please respond to dayo olabisi <ccie_student@yahoo.com>
Sent by: nobody@groupstudy.com
To: ccielab
cc:
bcc:
Subject: Nat issue
Hi listers,
I'm having a unique problem with NAT on one of my
border routers:
a "sh ip nat trans" displays only active 2 dynamic
entries, but a "sh ip nat stat" shows 132 of 205 total
addresses are allocated.
a "sh arp" does show a list of dynamic addressses that
should have long been cleared. "clear arp" doesn't
seem to clear these entries also.
is there a way to force a reset of the pool without
reloading (it's a production router). also is there a
way to force off specific arp entries?
any ideas is much appreciated.
Thx,
dayo
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:58 GMT-3