From: Hamele Kassa (hkassa@attrmc.net)
Date: Mon Nov 11 2002 - 17:14:08 GMT-3
Brian,
You do not need to secure your own registered address/es(your network has to
be bigger than /19 space to qualify). The IP address/es assigned to you
from your providers (/24 or shorter address space) will work for you as
long as you are running BGP(no longer prefix than /24). However you need to
secure and AS from ARIN(if you are multihomed you will qualify).
I hope this helps.
HK
----- Original Message -----
From: "Brian T. Albert" <brian.albert@worldnet.att.net>
To: "MADMAN" <dave@interprise.com>
Cc: <ccielab@groupstudy.com>
Sent: Sunday, November 10, 2002 10:51 AM
Subject: RE: BGP & multihoming
> When you say "your own registered address/es", do you mean prefixes
assigned
> to you from your 2 providers or obtained from another authority? What
other
> authority can assign you prefixes independent of you providers, and what
are
> the requirements to obtain them?
>
> BA
>
> -----Original Message-----
> From: MADMAN [mailto:dave@interprise.com]
> Sent: Saturday, November 09, 2002 9:12 PM
> To: Brian T. Albert
> Cc: ccielab@groupstudy.com
> Subject: Re: BGP & multihoming
>
>
>
> You don't need NAT if you have your own registered address/es. No
special
> config required, you simply announce your public address/es
>
> Dave
>
> "Brian T. Albert" wrote:
>
> > In the real world can BGP multihoming to 2 different providers be
> > accomplished without NAT for the internal networks? I have found some
> links
> > on CCO http://www.cisco.com/warp/public/459/BGP-PIX.htm that show how to
> do
> > it with NAT, but is it possible without. If so, can someone supply some
> > config examples or good links.
> >
> > Thanks
> >
> > Brian T. Albert
> > brian.albert@worldnet.att.net
>
> --
> David Madland
> CCIE# 2016
> Sr. Network Engineer
> Qwest Communications Inc.
> 612-664-3367
> dave@interprise.com
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:56 GMT-3