From: Carlos G Mendioroz (tron@huapi.ba.ar)
Date: Sun Nov 10 2002 - 09:00:58 GMT-3
PU,
just don't put a dialer string on the other side.
(No number to dial ==> no dialing :-)
There are two ways of merging multiple channels into one
call (cisco's own and MPPP). If you configure none, none
will be used (and only one channel will be used per destination).
'ppp authentication chap callin' is only for determining who
authenticates who. Normally both ends mutually authenticate each other
if authentication is configured.
Also, you still need interesting traffic in the receiving side, or else
the receiving side will be dropping the connection every 2 minutes.
(default idle time)...
I would suggest you do review the list archives. There are tons of info
and interesting things in there for you to discover regarding DDR and
almost every other topic.
HTH.
Jake Jake wrote:
> Dont specify interesting traffic (i.e. no dialer-list)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Rich Doty
> Sent: Sunday, November 10, 2002 12:15 AM
> To: 'Prio Utomo'; ccielab@groupstudy.com
> Subject: RE: ISDN Question
>
>
> It's my understanding that you can put 'ppp authentication chap callin'
> on the side you want to have the ability to dial, and only that side
> will be able to initiate calls. I believe you'll still need the
> dialer-group command on the other side.
>
> Not sure on your second question, sorry.
>
> Rich
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Prio Utomo
> Sent: Saturday, November 09, 2002 11:03 PM
> To: ccielab@groupstudy.com
> Subject: ISDN Question
>
>
> Dear All,
>
>
> I have two routers connected using two line: ISDN and FR.
>
> How I can make only one router side can inisiate the ISDN call? Can I
> just remote dialer map or dialer string or dialer-group command?
>
> If i am not using ppp multilink, and I am using one of Dial-on-Deman
> methods, does the second b channel will be used? Or I can only uses the
> first channel Or it will be utilized randomly.
>
> regards,
> PU
>
-- Carlos G Mendioroz <tron@huapi.ba.ar> LW7 EQI Argentina
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:56 GMT-3