OSPF redistribute connected issue

From: jim.phillipo@guardent.com
Date: Thu Nov 07 2002 - 18:35:21 GMT-3


Rt 13 is redistributing connected interfaces. R9 is directly attached to E0
but is only seeing the host routes to 10.1.11.0. The loopback of r13 is
showing up as a E2 route with the correct network mask.

Any thoughts ? this is lab 17 of NLI. I have double checked their configs
and as far as I see mine is the same.

interface Loopback0
 ip address 15.15.13.13 255.255.255.0
 ip router isis
!
interface Ethernet0/0
 ip address 10.1.5.4 255.255.255.248
!
interface Serial0/0
 no ip address
 encapsulation frame-relay
 no fair-queue
 no frame-relay inverse-arp
!
interface Serial0/0.14 multipoint
 ip address 10.1.11.14 255.255.255.0
 ip ospf network point-to-multipoint
 frame-relay map ip 10.1.11.1 102 broadcast
 frame-relay map ip 10.1.11.3 101 broadcast
!
interface Serial0/0.193 point-to-point
 ip address 10.1.12.193 255.255.255.240
 ip router isis
 frame-relay interface-dlci 100
!
interface Ethernet0/1
 no ip address
!
router ospf 1
 no log-adjacency-changes
 redistribute connected metric 100 subnets
 redistribute isis level-1
 network 10.1.5.4 0.0.0.0 area 10
 network 10.1.11.0 0.0.0.255 area 0
!

r9>
r9>en
r9#sho ip rou
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

O IA 200.20.20.0/24 [110/138] via 10.1.5.4, 17:58:31, Ethernet0
O E2 172.27.0.0/16 [110/50] via 10.1.5.2, 17:58:31, Ethernet0
     10.0.0.0/8 is variably subnetted, 8 subnets, 5 masks
O E2 10.1.10.0/24 [110/50] via 10.1.5.2, 17:58:31, Ethernet0
O IA 10.1.11.1/32 [110/74] via 10.1.5.4, 17:58:31, Ethernet0 These
should have a E2 route ?
O IA 10.1.11.3/32 [110/74] via 10.1.5.4, 17:58:31, Ethernet0
O E2 10.2.1.0/24 [110/50] via 10.1.5.2, 17:58:31, Ethernet0
O IA 10.1.11.14/32 [110/10] via 10.1.5.4, 17:58:31, Ethernet0
C 10.1.5.0/29 is directly connected, Ethernet0
O E2 10.1.35.4/30 [110/50] via 10.1.5.2, 17:58:32, Ethernet0
O E2 10.1.12.192/28 [110/100] via 10.1.5.4, 17:58:32, Ethernet0
     15.0.0.0/8 is variably subnetted, 6 subnets, 2 masks
O 15.15.6.6/32 [110/11] via 10.1.5.2, 17:58:32, Ethernet0
O IA 15.15.2.2/32 [110/139] via 10.1.5.4, 17:58:32, Ethernet0
O IA 15.15.1.1/32 [110/75] via 10.1.5.4, 17:58:32, Ethernet0
O 15.15.4.4/32 [110/11] via 10.1.5.1, 17:58:32, Ethernet0
C 15.15.9.0/24 is directly connected, Loopback0
O E2 15.15.13.0/24 [110/100] via 10.1.5.4, 17:58:32, Ethernet0 This is
correct.
r9#



This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:54 GMT-3