From: Nathan Chessin (nchessin@cisco.com)
Date: Thu Nov 07 2002 - 15:12:16 GMT-3
Hedi,
I think what they meant was you *should* only configure the
no-redistribution on the ASBR that is also the ABR. Sure this will work on
the ASBR that is not also an ABR, but what's the point of redistributing on
the router if you won't allow it into the area.
Nate
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Hedi Abdelkafi
> Sent: Thursday, November 07, 2002 5:16 AM
> To: GroupStudy (E-mail)
> Subject: OSPF: NSSA Filtering
>
>
> Hi,
>
> In the following URL
> http://www.cisco.com/warp/customer/104/nssa.html, (section
> Filtering in NSSA) it's said that the option
> no-Redistribution can only be used on an NSSA ASBR that's also an ABR.
> I tested this command on the NSSA ASBR (the router on the
> right side on the picture) and it works ... fine (RIP routes
> are not propagated in the NSSA Area 1) !!!
> Are they any mistakes in the documentation ?
> Thanks a lot for your help.
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:54 GMT-3