RE: Can FR switch be configured as DTE?

From: kym blair (kymblair@hotmail.com)
Date: Thu Nov 07 2002 - 09:34:35 GMT-3

• Next message: 张建星: "Re: deny 135.1.X.0/24"
• Previous message: frank.yu@japan.bnpparibas.com: "deny 135.1.X.0/24"
• Maybe in reply to: Fan Shan: "Can FR switch be configured as DTE?"
• Next in thread: Larson, Chris: "RE: Can FR switch be configured as DTE?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Fan,

Put the "clock rate 64000" on whichever end of the serial crossover cable is
DCE; can be on the frame-relay switch end or the router end. Then put the
"frame-relay intf-type dce" on the switch interface.

Kym

>From: Brian Dennis <brian@5g.net>
>Reply-To: Brian Dennis <brian@5g.net>
>To: "'Fan Shan'" <fansh@publicf.bta.net.cn>,
>"'Ccielab@Groupstudy.Com'" <ccielab@groupstudy.com>
>Subject: RE: Can FR switch be configured as DTE?
>Date: Wed, 06 Nov 2002 22:17:09 -0800
>
>Yes.
>
>Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security)
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Fan Shan
>Sent: Wednesday, November 06, 2002 9:40 PM
>To: Ccielab@Groupstudy.Com
>Subject: Can FR switch be configured as DTE?
>
>Can FR Switch be configured as DTE and the other side configured as DCE?

• Next message: 张建星: "Re: deny 135.1.X.0/24"
• Previous message: frank.yu@japan.bnpparibas.com: "deny 135.1.X.0/24"
• Maybe in reply to: Fan Shan: "Can FR switch be configured as DTE?"
• Next in thread: Larson, Chris: "RE: Can FR switch be configured as DTE?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:54 GMT-3