From: csc david (davidcsc2002@yahoo.com.cn)
Date: Tue Nov 05 2002 - 21:16:34 GMT-3
I put area 0 range in router1, so the router2 can see the summary route, but it's point to null0, even by redistributing,
router1's s0 route is still not seen by router3 .
because router3 must see the router1's s0 route, so cannot use default-information originate.
Adam Crisp <adam.crisp@totalise.co.uk> 5DU}ND#: Is doing a default-information originate allowed on R2?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
csc david
Sent: 05 November 2002 16:10
To: ccielab@groupstudy.com
Subject: redistibute between classful and classless
here:
(s0)router1(e0)-----(e0)router2(s1)--------(s1)router3
router1: s0(172.10.10.1/255.255.255.192) e0(172.10.20.1/255.255.255.0)
router2: e0(172.10.20.2/255.255.255.0) s1(172.10.30.1/255.255.255.0)
router1's s0 in ospf area 0, router1's e0 and router2's e0 in ospf area 1,
router2's s1 and router3's s1 in igrp, then redistribute them
on router2. So how can router3 see the route about router1's s0? in normal
redistribution you cannot see this route, and you cannot
do it with static or null0 route. please help!
---------------------------------
Do You Yahoo!?
"JGIT>+S"Bp#?P!JTE#56;qJ1IP4s=1#!"
---------------------------------
Do You Yahoo!?
"JGIT>+S"Bp#?P!JTE#56;qJ1IP4s=1#!"
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:53 GMT-3