From: Sara Li (saralilin@hotmail.com)
Date: Sun Nov 03 2002 - 21:25:42 GMT-3
Chris
thanks for reply, say if i have some ethernet host, i want remote dlsw
peers to access, i need to convert the mac address of the eth host to
non-canonical in the dlsw icanreach statement?
Sara
>From: Chris >Reply-To: Chris >To: Sara Li , ccienxtyear@hotmail.com,
ghie_pogi@yahoo.com, ccielab@groupstudy.com >Subject: Re: DLSW help
>Date: Sun, 03 Nov 2002 09:12:00 -0500 > >when doing DSLW all filters
etc. using MAC addresses are non-canonical. >Always non cananical with
DLSW. > >----- Original Message ----- >From: "Sara Li" >To: ; ; > >Sent:
Saturday, November 02, 2002 8:52 PM >Subject: Re: DLSW help > > > > jay,
> > > > the macaddress in icanreach command, it the mac address here is
canonical > > or non-canonical? or it can be both? > > > > Thanks > > > >
> > > > >From: "Jay" > > > > >Reply-To: "Jay" >To: "Angelo De Guzman" ,
>Subject: Re: DLSW help >Date: > > Sat, 2 Nov 2002 16:17:52 -0800 > >DLSW
protocol filter > >access-list 200 > > permit 0xf0f0 0x0101 > >dlsw
remote-peer 0 tcp (ip address of remote > > peer) lsap-output-list >200
---this will only permit Netbios traffic to > > this peer. > > >DLSW MAC
filter > >dlsw icanreach mac-address > > 4000.3725.0101 (dlsw will take
care of the >canonical/non-canonical > > conversions) >dlsw icanreach
mac-exclusive > > >-Jay > > >----- Original > > Message ----- >From:
"Angelo De Guzman" >To: >Sent: Saturday, November > > 02, 2002 4:04 AM
>Subject: DLSW help > > > > hi, > > I'm not really > > familiar with
dlsw. Need help on > > this. > > Thanks. > > > > DLSw+ > > Protocol
filter: > > - Configure a filter such that the only protocol > > that > >
is transported via DLSw is NetBIOS. Apply this filter > > to > > > > the
DLSw+ remote peer statements on R5. > > DLSw+ MAC filter: > > - > >
Configure DLSw+ such that R2 informs all its peers > > that the only MAC
> > address that R2 can reach is > > 4000.3725.0101. > > - Verify your >
> configuration is correct by viewing the > > peer capabilities. > > > >
> > Thanks in Advance, > > Angelo > > > > > >
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:52 GMT-3