From: Jay (ccienxtyear@hotmail.com)
Date: Sat Nov 02 2002 - 21:21:08 GMT-3
Can you provide your configs.
I would suggest to use an access-list/route map to permit the loopback
network.
-Jay
----- Original Message -----
From: "Shailen Amichand" <shailen.amichand@xtra.co.nz>
To: <ccielab@groupstudy.com>
Sent: Friday, November 01, 2002 5:59 PM
Subject: another redistribution question
> Hi folks
>
> Apologies for this one.
>
> I have a router doing mutual redist between OSPF and EIGRP. Now there is
> a Loopback that is not part of either protocol.
>
> What is the best way to advertise this interface?
>
> When I try redist connected with a route-map allowing only this
> interface in the OSPF process, I loose all my other connected interfaces
> for EIGRP & OSPF.
>
> If I do just redist connected subnets allowing all routes, then the all
> interfaces are learned by OSPF and not by their correct protocol.
>
> What am I doing wrong or missing here?
>
> Any advise on this would be appreciated.
>
> Please help.
> Shailen
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:51 GMT-3