From: Andrew Bratchell (a.bratchell@caeuk.com)
Date: Fri Nov 01 2002 - 20:47:06 GMT-3
ITs a known bug, you need to type in the full command syntax required, it will work.
-----Original Message-----
From: aansar@sscomp.com.sg [mailto:aansar@sscomp.com.sg]
Sent: 31 October 2002 06:34
To: ccielab@groupstudy.com
Subject: rsvp help pls
in 2610 and 2620 running 12.1(5)T9 , if i type <ip rsvp ?> i am getting
this error message, but if i type <ip rsvp bandwidth 40 40> it works
fine...
router8(config-subif)#ip rsvp ?
% Ambiguous command: "ip rsvp "
in 2501 , i am running the same image 12.1(5) T9, the ? works fine , what could be the problem?
router1(config-if)#ip rsvp ?
bandwidth RSVP reservable bandwidth(KBPS)
burst RSVP burst
flow-assist Use netflow to assist RSVP
neighbor Select Permissible RSVP Neighbors
precedence RSVP precedence setting
signalling RSVP signalling
tos RSVP TOS setting
udp-multicasts Use RSVP UDP Multicasts
any idea ,
thanks
aa
**********************************************************************
Disclaimer
This email is confidential and intended solely for the use of
the individual to whom it is addressed. Any views or opinions
presented are solely those of the author and do not necessarily
represent those of CAE Office Systems. If you are not the
intended recipient, be advised that you have received this
email in error, and that any use, dissemination, forwarding,
printing or copying of this email is strictly prohibited. If you
received this email in error, please contact Lee Gatland on
+44 (0) 1923 477600
**********************************************************************
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:51 GMT-3