From: McClure, Allen (Allen.McClure@Tricon-Yum.Com)
Date: Fri Nov 01 2002 - 17:44:57 GMT-3
1. Establish an ILMI PVC to the switch.
2. Run atm ilmi-pvc-discovery on the atm interface
3. show atm pvc
4. map on the interface or use inarp
That's from brain to email, but I think it's about right.
Allen McClure
MCSE, CCNP, CCDP
YUM! Brands, Inc.
Sr. Network Analyst
NEW E-Mail - mailto:allen.mcclure@yum.com
972-338-7494
-----Original Message-----
From: Angelo De Guzman [mailto:ghie_pogi@yahoo.com]
Sent: Friday, November 01, 2002 6:35 AM
To: ccielab@groupstudy.com
Subject: ATM
Hi,
I'm trying to this.
ATM Configuration:
Configure R7 using the following information so you
can connect to the router in the ATM cloud.
- You must discover your VPI/VCI pair, and then
manually configure them in your configuration.
- Configure the ATM interface IP address to have its
last octet equal to the pod #.
- You may not use map-lists in your ATM configuration.
I can't make this work. I really don't have an idea
how to make this work. Any idea on what is the other
side of this ATM connection?
My config:
interface ATM1/0
no ip add
atm ilmi-keepalive
atm ilmi-pvc-discovery
pvc 0 0/16 ilmi
!
R7#sh atm ilmi-status
Interface : ATM1/0 Interface Type : Private UNI
(User-side)
ILMI VCC : (0, 16) ILMI Keepalive : Disabled
ILMI State: UpAndNormal
Peer IP Addr: 0.0.0.0 Peer IF Name:
ATM0/0/0
Peer MaxVPIbits: 8 Peer MaxVCIbits: 14
Active Prefix(s) :
47.0091.8100.0000.0031.8019.2d01
R7#
Thanks,
Angelo
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:51 GMT-3