From: Janto Cin (jantocin@datacomm.co.id)
Date: Fri Nov 01 2002 - 03:13:06 GMT-3
Benny,
Try to add "area 0 authentication message-digest" on both routers.
HTH
Janto
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Benny Chong
Sent: Friday, November 01, 2002 9:30 AM
To: ccielab@groupstudy.com
Subject: OSPF virtual link authentication
Hi all experts,
------R1--------R2---------R3---------R4--------
area1 area0 area0 area1 area2
if area 0 is running md5 authentication, when I configure the virutal
link
between R3 and R4 to connect area 2 to area 0, I think I need to
configure
authentication for the virtual link, because when i 'debug ip ospf adj',
i
saw R3 is showing message that it receive authentication packet from R4,
but
the authentication type didn't match. I try to configure
area 1 virtual-link 200.0.0.7 message-digest-key 1 md5 cisco
on both R3 and R4, but it didn't work. Anyone has an idea?
Thanks!
Benny
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:50 GMT-3