From: Sara Li (saralilin@hotmail.com)
Date: Fri Nov 01 2002 - 01:08:07 GMT-3
i found this link from cisco web site i found helpful too.
http://www.cisco.com/en/US/tech/tk648/tk363/technologies_tech_note09186a0080094821.shtml#autowithone
>From: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
>To: "Sara Li" <saralilin@hotmail.com>
>CC: ccielab@groupstudy.com, nobody@groupstudy.com
>Subject: Re: multicast quesiton part 2
>Date: Fri, 1 Nov 2002 12:00:35 +0800
>
>
>1. Depens on many factor this is not an easy question to aske and there is
>no exact guidance.
>2. To map a multicast group to an RP
>3. Assigned a router Loopback 0 interface to be the mapping agent with a
>scope of 16
>
>Donny
>
>
>
> "Sara Li"
> <saralilin@hotmai To:
>ccielab@groupstudy.com
> l.com> cc:
> Sent by: Subject: multicast
>quesiton part 2
> nobody@groupstudy
> .com
>
>
> 01-11-2002 11:21
> Please respond to
> "Sara Li"
>
>
>
>
>
>
>some more questions on multicast: 1. how do i choose RP map agent in auto
>rp config?2.what is the function of rp map agent?3, what does this
>command do?
>ip pim send-rp-announce Loopback10 scope 16
>thanks very much. Sara
>
>------------------------------------------------------------------------
>
>Surf the Web without missing calls! Get MSN Broadband. Click Here
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:50 GMT-3