OSPF neighbor between point-to-point subinterface and Natural

From: Benny Chong (c_benny@hotmail.com)
Date: Thu Oct 31 2002 - 19:15:44 GMT-3

• Next message: Frank Maisano: "RE: CCIE Tracks"
• Previous message: Jung, Jin: "Have you seen this - bootP / ARP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi expert,

A simple question:

2 routers connect over Frame Relay, R1 use point-to-point subinterface (s0.1
point-to-point), R2 use the natural interface (s0). They run OSPF.

My question is, beside using 'ip ospf network point-to-point' on R2 s0 in
order for R1 and R2 to form neighbor, is there any other method?

I try to use 'neighbor' command on R2, but it doesn't work. So is changing
the network type the only solution?

Thanks!
Benny

• Next message: Frank Maisano: "RE: CCIE Tracks"
• Previous message: Jung, Jin: "Have you seen this - bootP / ARP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:36:01 GMT-3