From: Ram Shummoogum (rshummoo@ca.ibm.com)
Date: Thu Oct 31 2002 - 17:05:02 GMT-3
Deepesh:
so--r2-e0--e0--r5--e1: Note I have a lan extension between between r2 and
r5.
my desktop is on e1.I can ping the inside interface of r2.
what I am trying to achieve is that I want the destination address replaced
from 172.17.1.20 to 150.50.200.14
I don't know if it possible?
I changed 172.17.1.20 to 172.17.2.20 and this time it times out.
regards,
RAM-514-205-6612
"Deepesh Chouhan" <deepesh@cisco.com> on 10/31/2002 02:42:41 PM
To: Ram Shummoogum/Quebec/IBM@IBMCA, <ccielab@groupstudy.com>
cc:
Subject: RE: NAT-help- urgent
Hi
Can you throw in topology
Which subnet is your workstsation connected ?
thanks
Deepesh
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Ram Shummoogum
> Sent: Thursday, October 31, 2002 10:51 AM
> To: ccielab@groupstudy.com
> Subject: NAT-help- urgent
>
>
> Hi experts:
>
> I am stuck on a nat issue:
>
> R2:
> int e0
> ip address 172.17.1.18/24
> ip nat inside
>
> int ser 0
> ip add 150.50.17.2/24
> ip nat outside
>
>
> ip nat inside destination static 172.17.1.20 150.50.200.14
>
>
> When I ping from a workstation to 172.17.1.20 I get a +ve response
> It looks like 172.17.1.20 is responding to my request locally. The
> translation is not taking place because I still get a +ve response after
> I disconnect 150.50.200.14.
>
> My workstation source address is 172.16.18.0
>
>
> Your help is greatly appreciated.
>
> regards
>
> RAM-514-2056612
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:36:01 GMT-3