From: Hedi Abdelkafi (Hedi.Abdelk@simac.lu)
Date: Thu Oct 31 2002 - 07:23:57 GMT-3
Hi,
I have a problem with redistribution from OSPF into RIP.
Here's the topology
R1---RIP---R2---OSPF AREA0---R3---OSPF AREA 10
Network between R1 and R2 : 133.7.23.0/24
Network between R2 and R3 : 133.7.147.0/24
On R3, the following loopback interfaces are configured (these loopback are redistributed into the OSPF process) :
loop 1 : 160.100.100.1/24
loop 2 : 160.100.128.1/24
loop 3 : 192.190.100.1/24
loop 4 : 192.190.101.1/24
loop 5 : 192.190.102.1/24
I would like that loop 1 and 2 appears as a single route.
The same for loopback 3,4 and 5.
On R3, I use the following command to create the summary route
summary-address 192.190.0.0 255.255.0.0
summary-address 160.100.0.0 255.255.0.0
These summary appears, as expected, on R2.
Now, I redistribute OSPF into RIP on R2.
On R1, I can only see the 160.100.0.0/16 route !
Why I cannot see the 192.190.0.0/16 route ?
It is because the redistributed route has not it's normal subnet mask /24 ??
Thanks for your help.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:36:00 GMT-3