From: aansar@sscomp.com.sg
Date: Mon Oct 28 2002 - 21:55:56 GMT-3
you can use CBWFQ
but for packet size .. i think you can use route-map , match the length
and set the ip precedence
And filter according to precedence from the CBWFQ
"Hamele Kassa" <hkassa@attrmc.net>
Sent by: nobody@groupstudy.com
29-10-02 08:41 AM
Please respond to "Hamele Kassa"
To: "ccielab" <ccielab@groupstudy.com>
cc:
Subject: queuing
group,
If the question states as follows which queueing mech I should use.
bandwidth on interface 2048 and each protocol should use exact bandwidth
prot 1- 40% with packet size 512, prot 2- 20% with packet size 1024 and
prot 3
- 40% with packet size 256
thanks,
hk
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:58 GMT-3