From: Desimone, Aurelio (ADesimone@refco.com)
Date: Mon Oct 28 2002 - 13:09:20 GMT-3
You should be able to do it if you run ios telephony service (an option on
some 12.2T codes). I'm not sure about splitting the T1, but the
NM-HDV-1T1-24 is the correct voice module if you had a T1 into a PBX (public
or private). Good luck
Aurelio
10267
-----Original Message-----
From: Jose Martos [mailto:jose@loudpacket.com]
Sent: Monday, October 28, 2002 2:43 AM
To: ccielab@groupstudy.com
Subject: OT: VOIP Telephony question
Hi folks,
I have the following scenario that I would like to seek for advice/help.
1) I have a channelized T1 coming in to the office which
split into
12 channels for internet and 12 channels for voice
2) From the CSU/DSU, I have a DTE/V.35 cable connecting
into my Cisco 3662 for internet.
3) For my other 12 voice channels, I would like to do VOIP
using all Cisco IP phones model 7960 and a Cisco 3640 with one
NM-HDV-1T1-24.
Do I have enough equipment to setup my internal VOIP
network so that internally, I can call my other colleages and
externally, I can use the same ip phone to call the
outside world? Please provide configuration guidelines or advice on
what kind of equipment I'm missing to complete this project.
Thanks for any help.
Cheers,
Jose Martos
Loud Packet, Inc.
26755 Jefferson Ave. Suite F
Murrieta, CA 92562
Email: jose@loudpacket.com
Ask a question in our Tech Forum:
http://www.loudpacket.com/tech.html
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:58 GMT-3