RE: corrupted header

From: steven.j.nelson@bt.com
Date: Sat Oct 26 2002 - 18:26:37 GMT-3

• Next message: Richard Davidson: "ospf E1 or E2 routes not redistributing."
• Previous message: steven.j.nelson@bt.com: "RE: passive-interface command"
• Maybe in reply to: eric: "corrupted header"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Erick

Check this out,

CSCdp42274

  A Cisco 7200 series router might exhibit the following error messages:
  %IPFAST-2-PAKSTICK: Corrupted pak header for ATM2/0,flags 0x80 Traceback=
60361750 60314134 6031AE38
  %IPFAST-2-PAKSTICK: Corrupted pak header for Virtual-Access6, flags 0x80
-Traceback= 603617EC 6065A270 60314134 6031AE38
  There is no workaround.

While this is on an ATM interface, it may be code related, what version of
IOS are you using ??

Thanks

Steve
CCIE#10055

-----Original Message-----
From: Chris [mailto:clarson52@comcast.net]
Sent: 26 October 2002 21:41
To: eric; ccielab@groupstudy.com
Subject: Re: corrupted header

Do you have IPSEC coming in on that interface by chance?
Try turning off fast switching. It will prolly go away. Of course you prolly
don't want to do process switching though.

----- Original Message -----
From: "eric" <namaste@pacbell.net>
To: <ccielab@groupstudy.com>
Sent: Saturday, October 26, 2002 4:02 PM
Subject: corrupted header

> Hey Guys,
> Does anyone have an idea how to resolve this error I am recieving on only
> one of my routers.
> Which is causing the bgp to reset over and over.
>
> %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0
>
> Did some research at cco ( no workaround )
> any suggestions would be great
>
> eric

• Next message: Richard Davidson: "ospf E1 or E2 routes not redistributing."
• Previous message: steven.j.nelson@bt.com: "RE: passive-interface command"
• Maybe in reply to: eric: "corrupted header"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:57 GMT-3