From: Brian Dennis (brian@5g.net)
Date: Sat Oct 26 2002 - 18:15:42 GMT-3
<From CCO>
IPFAST Messages
The following are IP fast switching error messages.
Error Message
%IPFAST-2-BADIF: No support available for interface [chars] (programming
error)
Explanation A programming error has occurred.
Recommended Action Copy the error message exactly as it appears on the
console or in the system log. Issue the show tech-support command to
gather data that may help identify the nature of the error. If you
cannot determine the nature of the error from the error message text or
from the show tech-support command output, contact your Cisco technical
support representative and provide the representative with the gathered
information.
</From CCO>
So looks like you will need to change the switching method used or
upgrade/downgrade the IOS.
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
eric
Sent: Saturday, October 26, 2002 1:03 PM
To: ccielab@groupstudy.com
Subject: corrupted header
Hey Guys,
Does anyone have an idea how to resolve this error I am recieving on
only
one of my routers.
Which is causing the bgp to reset over and over.
%IPFAST-2-PAKSTICK: Corrupted pak header for Serial0
Did some research at cco ( no workaround )
any suggestions would be great
eric
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:57 GMT-3