From: Wolfgang Marschner (wmarschner@web.de)
Date: Sat Oct 26 2002 - 17:20:33 GMT-3
Hello Eric,
because the nature lies in a programming failure together
with fast switching mode, three possible things can be done
in my opinion:
1) Do a show tech-support and send it with the error message
to Cisco. May be the best for a production router
2) Use another switching method, if possible, as a short term
solution.
3) Change to another IOS, where this failure may not exist.
Regards
Wolfgang Marschner
CCIE #8232
----- Original Message -----
From: "eric" <namaste@pacbell.net>
To: <ccielab@groupstudy.com>
Sent: Samstag, 26. Oktober 2002 22:02
Subject: corrupted header
> Hey Guys,
> Does anyone have an idea how to resolve this error I am recieving on only
> one of my routers.
> Which is causing the bgp to reset over and over.
>
> %IPFAST-2-PAKSTICK: Corrupted pak header for Serial0
>
> Did some research at cco ( no workaround )
> any suggestions would be great
>
> eric
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:57 GMT-3