From: Chris (clarson52@comcast.net)
Date: Fri Oct 25 2002 - 23:48:42 GMT-3
There is another side to that. Sometimes configuring extra things they don't
ask for can make it easier on you. Like OSPF and BGP router-ids, or
route-maps/tags/filters, passive interface default etc.
----- Original Message -----
From: "Tim Medley" <tim.medley@ireadyworld.com>
To: "Persio Pucci" <persiopucci@uol.com.br>; <ccielab@groupstudy.com>
Sent: Friday, October 25, 2002 10:13 PM
Subject: RE: good practices at the lab
> Not sure if it would count against you if it didn't interfere with the
tasks specified on you lab. But my philosophy is KISS; Keep It Simple
Stupid.
>
> The more stuff you add the more complex troubleshooting can get.
>
> Also it's been drilled into me that every second counts in the lab.
>
> tm
>
>
>
> Tim Medley, CCNP+Voice, CCDP, CWNA
> Sr. Network Architect
> VoIP Group
> iReadyWorld
>
>
>
>
> -----Original Message-----
> From: Persio Pucci [mailto:persiopucci@uol.com.br]
> Sent: Friday, October 25, 2002 8:03 AM
> To: ccielab@groupstudy.com
> Subject: good practices at the lab
>
>
> Folks,
>
> I've been thinking about it... what if you configure a couple of things no
the
> router that YOU consider being good pratice, that altough they are (or may
be)
> not asked in the lab content, like for example, disabling ip http-server,
or,
> if you have is-is on the lab, enabling clns routing altough not needed if
only
> routing IP (and not using default route).... how would thet see that?
Would
> it count towards you or wouldn't it make any difference?
>
> Regards,
>
> Persio
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:57 GMT-3