From: Neil Evans (neievans) (neievans@cisco.com)
Date: Fri Oct 25 2002 - 02:36:58 GMT-3
If you don't use the no-summary, it will suppress lsa 5's but not push a
0.0.0.0 route into the nssa - that's when you'd use the
default-info-orig
-----Original Message-----
From: Wright, Jeremy [mailto:JA_WRIGHT@admworld.com]
Sent: Wednesday, October 23, 2002 3:26 PM
To: 'ccielab@groupstudy.com'
Subject: nssa no-summary question
i have area 100 setup as a "nssa no-summary" between r1 and r2. on the
other
side of r1 is area 0. r1 dumps a default route down to r2 because of the
no-summary argument. would there be any reason to use
default-information-originate in this scenario? thanks
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:56 GMT-3