From: ying c (bf5tgh1@yahoo.com)
Date: Thu Oct 24 2002 - 23:02:13 GMT-3
Hi,
I should not say solution 2 is a wrong answer as you
guys pointed out. If there's only one DLCI, then
solution 1 and solution 2 will be the same as you
said. But if you have multiple DLCIs, then I think the
outcome of solution 1 and solution 2 will be a little
bit different. In soultion 1, all circuits will get
56kbps as their cir, and dlci 403 will have 16kbps as
its cir; in solution 2, every circuits will have
16kbps as its cir.
Sorry about the confusion and thanks to point out my
mistakes.
Chang
--- ??? <bhhan@netcom.co.kr> wrote:
> hi , there
>
> i think that is the same,but situation 1 is applied
> on more sophisticate case. maybe....
>
> it's my opinion..
>
> thanks..
>
> Byung Hark, Han
> ==============================
> Business Development
> NetCom Systems, Inc
> Tel: +82-2-2167-8558
> Fax:+82-2-2167-8600
> E-mail: bhhan@netcom.co.kr
> or kingpat@orgio.net
> http://www.netcom.co.kr
> ----- Original Message -----
> From: <frank.yu@japan.bnpparibas.com>
> To: <bf5tgh1@yahoo.com>
> Cc: <ghie_pogi@yahoo.com>; <ccielab@groupstudy.com>
> Sent: Friday, October 25, 2002 7:48 AM
> Subject: Re: FRTS
>
>
> > And another trick for us to always remember is
> 1k=1024. ;-)
> >
> > Frank
> >
> >
> >
> > Internet
> > bf5tgh1@yahoo.com@groupstudy.com - 10/24/2002
> 09:37 PM
> >
> >
> > Please respond to bf5tgh1@yahoo.com
> >
> > Sent by: nobody@groupstudy.com
> >
> > To: ghie_pogi, ccielab
> >
> > cc:
> >
> >
> > Subject: Re: FRTS
> >
> >
> > Hi,
> >
> > When you apply frame-relay traffic-shaping, every
> dlci
> > will be default to 56kbps. Solution 1 tells the
> router
> > you want dlci 403 has specified traffic shaping
> > parameters other than the default. Solution 2 is a
> > wrong answer for FRTS, if you compare soultion 1
> and
> > solution 2 by 'show frame pvc <dlci>', you should
> be
> > able to see the difference clearly.
> >
> > Chang
> > --- Angelo De Guzman <ghie_pogi@yahoo.com> wrote:
> > > Hi,
> > > Hub and Four Spoke
> > >
> > > Objective: Configure such that the spokes
> > > does not over-subscribe the data carrying
> > > capacity of the Hub. No bursting over the CIR
> > >
> > > Solution 1:
> > > interface serial 0
> > > frame-relay interface-dlci 403
> > > class limit
> > >
> > > map-class frame-relay limit
> > > frame-relay cir 16000
> > > frame-relay bc 300
> > > frame-relay be 0
> > > no frame-relay adaptive-shaping
> > >
> > > Solution 2
> > > interface serial 0
> > > frame-relay class limit
> > >
> > > map-class frame-relay limit
> > > frame-relay cir 16000
> > > frame-relay bc 300
> > > frame-relay be 0
> > > no frame-relay adaptive-shaping
> > >
> > > What's the difference between solution 1
> > > and solution 2? I'm a little bit confused
> > > and doubts myself if they are the same.
> > >
> > > Thanks,
> > > Angelo
> > >
> > >
> __________________________________________________
> > > Do you Yahoo!?
> > > Y! Web Hosting - Let the expert host your web
> site
> > > http://webhosting.yahoo.com/
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Y! Web Hosting - Let the expert host your web site
> > http://webhosting.yahoo.com/
> >
> >
> >
> >
> >
> > This message and any attachments (the "message")
> is
> > intended solely for the addressees and is
> confidential.
> > If you receive this message in error, please
> delete it and
> > immediately notify the sender. Any use not in
> accord with
> > its purpose, any dissemination or disclosure,
> either whole
> > or partial, is prohibited except formal approval.
> The internet
> > can not guarantee the integrity of this message.
> > BNP PARIBAS (and its subsidiaries) shall (will)
> not
> > therefore be liable for the message if modified.
> >
> >
> ---------------------------------------------
> >
> > Ce message et toutes les pieces jointes (ci-apres
> le
> > "message") sont etablis a l'intention exclusive de
> ses
> > destinataires et sont confidentiels. Si vous
> recevez ce
> > message par erreur, merci de le detruire et d'en
> avertir
> > immediatement l'expediteur. Toute utilisation de
> ce
> > message non conforme a sa destination, toute
> diffusion
> > ou toute publication, totale ou partielle, est
> interdite, sauf
> > autorisation expresse. L'internet ne permettant
> pas
> > d'assurer l'integrite de ce message, BNP PARIBAS
> (et ses
> > filiales) decline(nt) toute responsabilite au
> titre de ce
> > message, dans l'hypothese ou il aurait ete
modifie.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:56 GMT-3