From: Brian Dennis (brian@5g.net)
Date: Thu Oct 24 2002 - 13:40:37 GMT-3
Go to the Cisco Doc CD. Look in the 12.1 routing protocols command
reference. Check and see if the "ip split-horizon" command is documented
in the OSPF section like it's documented in the RIP, IGRP and EIGRP
sections ("ip split-horizon eigrp" for EIGRP). If it's not documented
for OSPF you should be able to figure out the answer.
Good Luck,
Brian Dennis, CCIE #2210 (R&S/ISP Dial)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Azhar Mehmood
Sent: Wednesday, October 23, 2002 11:15 PM
To: ccielab@groupstudy.com
Subject: IP split-horizon & OSPF
hi guys,
simple and short: does split-horizon rule effects OSPF routing update
(LSAs) propogation or OSPF process generaly? My personal view is it
doesnt (due to link-state), but I have seen some configs, where the only
IGP was OSPF and split-horizon was disable on all frame-relay
subinterfaces.
regards
Azhar M.
GERMANY
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:56 GMT-3