From: aansar@sscomp.com.sg
Date: Thu Oct 24 2002 - 03:29:11 GMT-3
here R2 and R3 also connected , so you dont have spilt horizon problem
consider if R2 and R3 is not connected , then spilt horizon comes in to
picture then u have to disable spilt horizon in the hub multi point
interface
Angelo De Guzman <ghie_pogi@yahoo.com>
Sent by: nobody@groupstudy.com
10/24/2002 02:18 PM
Please respond to Angelo De Guzman
To: ccielab@groupstudy.com
cc:
Subject: ip split-horizon eigrp
Hi,
R2 -|
/ |
R1 |172.168.38.0/24
\ |
R3 -|
R1 subinter is point-to-multi
R2 is physical
R3 is physical
I'm running EIGRP.
Do I need to enable?
ip split-horizon eigrp 10 on the spokes
My objective is to see the ethernet network on R1
via R2 and R3.
Actually when I use no or with ip split-horizon eigrp
10 on the spokes. I see on R1 network 172.168.38.0
reachable via R2 and R3. So what is correct?
Thanks,
Angelo
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:55 GMT-3