From: Kris Keen (kkeen@bigpond.net.au)
Date: Wed Oct 23 2002 - 22:51:10 GMT-3
ISDN is now working :) ISDN SIM and User Issue.
Pap is also working
Thanks all!
----- Original Message -----
From: "Jason Sinclair" <sinclairj@powertel.com.au>
To: "'Andrew Bratchell'" <a.bratchell@caeuk.com>; "Kris Keen"
<kkeen@bigpond.net.au>; "CCIE" <ccielab@groupstudy.com>
Sent: Thursday, October 24, 2002 11:36 AM
Subject: RE: ISDN & PAP
> Kris,
>
> Send through a debug ppp neg and ppp errors and ppp auth.
>
> Cheers,
>
> Jason Sinclair CCIE #9100
> Manager, Network Control Centre
> POWERTEL
> 55 Clarence Street,
> SYDNEY NSW 2000
> AUSTRALIA
> office: + 61 2 8264 3820
> mobile: + 61 416 105 858
> email: sinclairj@powertel.com.au
>
> -----Original Message-----
> From: Andrew Bratchell [mailto:a.bratchell@caeuk.com]
> Sent: Thursday, 24 October 2002 10:31
> To: Kris Keen; CCIE
> Subject: RE: ISDN & PAP
>
> Kris,
>
> I would remove your username statements and ppp pap-sent-username
statements
> on both routers and add them back in again if you haven't done so already
> You may have a hidden space floating around somewhere.
> Below is a sample config that I tested sometime ago.
>
> R4
>
> username R10 password cisco
> !
> interface loopback0
> ip address 4.1.1.1 255.255.255.0
> !
> Interface Bri0
> ip address 104.10.10.4 255.255.255.0
> encapsulation ppp
> isdn switch-type basic-net3
> ppp authentication pap
> ppp pap sent-username R4 password cisco
> dialer map ip 104.10.10.10 name R10 403 broadcast
> dialer-group 1
> !
> dialer-list 1 protocol ip permit
> ip route 10.1.1.0 255.255.255.0 104.10.10.10
>
>
> R10
>
> username R4 password cisco
> !
> interface loopback0
> ip address 10.1.1.1 255.255.255.0
> !
> interface Bri1/0
> ip address 104.10.10.10 255.255.255.0
> encapsulation ppp
> isdn switch-type basic-net3
> ppp authentication pap
> ppp pap sent-username R10 password cisco
> dialer map ip 104.10.10.4 name R4 402 broadcast
> dialer-group 1
> !
> dialer-list 1 protcol ip permit
> ip route 4.1.1.0 255.255.255.0 104.10.10.4
>
> Thanks
> Andy
>
>
> -----Original Message-----
> From: Kris Keen [mailto:kkeen@bigpond.net.au]
> Sent: 24 October 2002 01:00
> To: CCIE
> Subject: ISDN & PAP
>
>
> Hi All
>
> this is crazy! After working 10hours, it could be me but take a look
>
> R4 is the CALLING Router
> R6 is the CALLED Router
>
> Configs are:
>
>
> R4#sh run
> Building configuration...
> service password-encryption
> !
> hostname R4
> !
> username R6 password 7 112A3036343D
>
> interface BRI0
> ip address 172.20.16.1 255.255.255.0
> encapsulation ppp
> dialer idle-timeout 50000
> dialer string 1111
> dialer-group 1
> isdn switch-type basic-net3
> ppp authentication pap
> ppp pap sent-username R4 password 7 1531223F2705
> !
> dialer-list 1 protocol ip permit
> end
>
> R4#
>
>
> ****************************************
> ****************************************
> ****************************************
>
>
> R6#sh run
> service password-encryption
> hostname R6
> !
> username R4 password 7 072C087F6D26
> ip subnet-zero
>
> interface BRI0
> ip address 172.20.16.2 255.255.255.0
> encapsulation ppp
> dialer-group 1
> isdn switch-type basic-net3
> ppp authentication pap
> ppp pap sent-username R6 password 7 05282F3C0263
> !
> dialer-list 1 protocol ip permit
>
>
> R6#
>
>
>
>
> Debug on CALLING shows Username R4 not found, auth Failure....
>
> Ideas? ive got no clue. Configured like Solie
>
> Cheers
> KK
>
>
> **********************************************************************
> Disclaimer
> This email is confidential and intended solely for the use of
> the individual to whom it is addressed. Any views or opinions
> presented are solely those of the author and do not necessarily
> represent those of CAE Office Systems. If you are not the
> intended recipient, be advised that you have received this
> email in error, and that any use, dissemination, forwarding,
> printing or copying of this email is strictly prohibited. If you
> received this email in error, please contact Lee Gatland on
> +44 (0) 1923 477600
> **********************************************************************
>
>
> **********************************************************************
> PowerTel Limited, winners of
> Best Corporate/Wholesale Broadband Initiative, Australian Telecom Awards
2002
> Broadband Wholesale Carrier of the year, CommsWorld Telecomms Awards 2001
> Best Emerging Telco, Australian Telecom Awards 2001
>
> **********************************************************************
> This email (including all attachments) is intended solely for the named
> addressee. It is confidential and may contain commercially sensitive
> information. If you receive it in error, please let us know by reply
email,
> delete it from your system and destroy any copies.
>
> This email is also subject to copyright. No part of it should be
reproduced,
> adapted or transmitted without the prior written consent of the copyright
owner.
>
> Emails may be interfered with, may contain computer viruses or other
defects
> and may not be successfully replicated on other systems. We give no
> warranties in relation to these matters. If you have any doubts about
> the authenticity of an email purportedly sent by us, please contact us
> immediately.
>
> **********************************************************************
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:55 GMT-3