From: Jaspreet Bhatia (jasbhati@cisco.com)
Date: Wed Oct 23 2002 - 17:55:42 GMT-3
Folks,
I am trying to understand why this Named ACL is behaving
like this
First I make the NACL
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip access-list standard BGP-ROUTE-TO-USTRUST
Router(config-std-nacl)#permit 192.168.107.0
Router(config-std-nacl)#permit 162.93.0.0
Router(config-std-nacl)#deny 10.191.0.0 0.0.255.255
Router(config-std-nacl)#deny 10.190.0.0 0.0.255.255
Router(config-std-nacl)#permit 10.0.0.0
Router(config-std-nacl)#permit 172.16.0.0
Router(config-std-nacl)#end
Router#w
1d22h: %SYS-5-CONFIG_I: Configured from console by consoler m
Building configuration...
[OK]
Then when I display the ACL the order of the permit and deny statements
comes up all messed up . Am I missing something really fundamental here ?
Router#sho ip access BGP-ROUTE-TO-USTRUST
Standard IP access list BGP-ROUTE-TO-USTRUST
permit 192.168.107.0
permit 10.0.0.0
permit 172.16.0.0
permit 162.93.0.0
deny 10.191.0.0, wildcard bits 0.0.255.255
deny 10.190.0.0, wildcard bits 0.0.255.255
Router#
Thanks
===========================================================
| | | Jaspreet Bhatia, CCIE # 10347
||| ||| | High Touch Technical Support
.:|||||:..:|||||:. | Phone: 408.527.0303
Cisco Systems, Inc. | Fax: 408.527.2281
| 24x7 Support Center: 800.495.9121
===========================================================
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:54 GMT-3