From: Henry Jiang (hojiang@cisco.com)
Date: Tue Oct 22 2002 - 07:33:58 GMT-3
Hello,
As I understand, ISIS treat multipoint subinterface or FR physical interface
both as LAN. So seems not necessary to change all interfaces to be
multipoint subinterface. But I got the same problem, too, i.e., spoke
router can't install the route of the other spoke's interface, though it is
in the ISIS database (172.16.2.0). Anyone explain this? In which scenarios
ISIS will not install a route from its database? /Henry
houlab-2611c#sh is da de
IS-IS Level-2 Link State Database:
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
houlab-2611c.00-00 * 0x00000016 0x31A2 814 0/0/0
Area Address: 49.0001
NLPID: 0xCC
Hostname: houlab-2611c
IP Address: 172.16.1.1
Metric: 10 IP 172.16.123.0 255.255.255.0
Metric: 10 IS houlab-2611a.01
Metric: 0 IP 172.16.1.0 255.255.255.0
houlab-2610xm.00-00 0x0000000D 0x64F0 463 0/0/0
Area Address: 49.0002
NLPID: 0xCC
Hostname: houlab-2610xm
IP Address: 172.16.2.2
Metric: 10 IP 172.16.123.0 255.255.255.0
Metric: 10 IS houlab-2611a.01
Metric: 0 IP 172.16.2.0 255.255.255.0
houlab-2611a.00-00 0x00000010 0x705F 1064 0/0/0
Area Address: 49.0001
NLPID: 0xCC
Hostname: houlab-2611a
IP Address: 172.16.4.4
Metric: 10 IP 172.16.123.0 255.255.255.0
Metric: 10 IP 172.16.123.0 255.255.255.0
Metric: 0 IP 172.16.4.0 255.255.255.0
houlab-2611a.01-00 0x0000000E 0x1525 609 0/0/0
Metric: 0 IS houlab-2611a.00
Metric: 0 IS houlab-2611c.00
Metric: 0 IS houlab-2610xm.00
houlab-2611c#sh ip ro
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 172.17.79.254 to network 0.0.0.0
172.17.0.0/24 is subnetted, 1 subnets
C 172.17.79.0 is directly connected, Ethernet0/0
172.16.0.0/24 is subnetted, 3 subnets
i L2 172.16.4.0 [115/10] via 172.16.123.4, Serial0/0
C 172.16.1.0 is directly connected, Loopback0
C 172.16.123.0 is directly connected, Serial0/0
S* 0.0.0.0/0 [1/0] via 172.17.79.254
houlab-2611c#
----- Original Message -----
From: "Hung, Sing-Yu" <Sing-Yu.Hung@pccw.com>
To: "LoizosCisco" <david_steven2001@yahoo.com>; <ccielab@groupstudy.com>
Sent: Tuesday, October 22, 2002 9:45 AM
Subject: RE:ISIS
> Hi,
>
> I have changed the followings:
> 1. change r3 s0 to s0.1 multipoint
> 2. Change r5 s0 to s0.1 multipoint
> 3. set priority at r3 s0.1 and r5 s0.1 to 0
>
> However at r5 I can see the r3 lo 10 by "sho isis da detail" but why it
can
> not show up at routing table?
>
> **************************************************************
> r5#sho isis da l1 r3.00-00 de
>
>
> IS-IS Level-1 LSP r3.00-00
> LSPID LSP Seq Num LSP Checksum LSP Holdtime
ATT/P/OL
> r3.00-00 0x0000001B 0x3384 1175 0/0/0
> Area Address: 47
> NLPID: 0xCC
> Hostname: r3
> IP Address: 172.16.30.3
> Metric: 10 IP 172.16.30.0 255.255.255.128
> Metric: 10 IP 172.16.100.0 255.255.255.224
> Metric: 10 IS r3.01
> Metric: 10 IS r6.01
> **************************************************************
>
>
> Bradford Hung
>
> Pacific Century CyberWorks
> Tel: 288 33125
>
>
> -----Original Message-----
> From: LoizosCisco [mailto:david_steven2001@yahoo.com]
> Sent: Monday, October 21, 2002 10:21 PM
> To: Hung, Sing-Yu; ccielab@groupstudy.com
> Subject: RE: Redistribution
>
>
> Why are you using ISIS and ip ospf network commands
> together? Since you are using ISIS you do not need the
> ip ospf network commands.
>
>
http://www.cisco.com/en/US/customer/tech/tk472/tk474/technologies_tech_note0
> 9186a008009445a.shtml
>
>
> --- "Hung, Sing-Yu" <Sing-Yu.Hung@pccw.com> wrote:
> > Hi,
> >
> > Below is my config.
> >
> > (lo10)r3(s0)-------r6(s0.2)-----------(s0)r5
> >
> > r6 is the hub and r3 and r5 is the spoke in the
> > frame-relay
> > network.And isis is enable in r3, r6 and r5.
> >
> > In the begining, r5 can see r3 lo10, however after
> > few mins r3 lo10 will
> > disappear in r5. Can anyone tell me why? And why it
> > is L2 not L1?
> >
> ############################################################
> > r3 config:
> > clns routing
> > interface Loopback10
> > ip address 172.16.30.3 255.255.255.128
> > ip router isis
> > ip ospf network point-to-point
> > interface Serial0
> > ip address 172.16.100.3 255.255.255.224
> > ip router isis
> > encapsulation frame-relay
> > ip ospf message-digest-key 100 md5 ccie100
> > ip ospf network point-to-multipoint
> > no fair-queue
> > frame-relay map clns 103 broadcast
> > frame-relay map dlsw 103
> > frame-relay map ip 172.16.100.5 103 broadcast
> > frame-relay map ip 172.16.100.6 103 broadcast
> > frame-relay interface-dlci 103
> > clns router isis
> > !
> > router isis
> > net 01.0000.0000.0003.00
> >
> ############################################################
> > r6 config:
> > interface Serial0.2 multipoint
> > ip address 172.16.100.6 255.255.255.224
> > ip router isis
> > ip pim sparse-dense-mode
> > ip ospf message-digest-key 100 md5 ccie100
> > ip ospf network point-to-multipoint
> > frame-relay map clns 103 broadcast
> > frame-relay map clns 101 broadcast
> > frame-relay map dlsw 103
> > frame-relay map ip 172.16.100.3 103 broadcast
> > frame-relay map ip 172.16.100.5 101 broadcast
> > frame-relay interface-dlci 101
> > class 12k
> > frame-relay interface-dlci 103
> > class 24k
> > clns router isis
> > crypto map sec-1
> > !
> > router isis
> > net 01.0000.0000.0006.00
> > !
> >
> ############################################################
> > r5 config:
> > !
> > interface Serial0
> > ip address 172.16.100.5 255.255.255.224
> > ip router isis
> > encapsulation frame-relay
> > ip ospf message-digest-key 100 md5 ccie100
> > ip ospf network point-to-multipoint
> > ip igmp join-group 224.1.1.1
> > frame-relay map clns 101 broadcast
> > frame-relay map ip 172.16.100.3 101 broadcast
> > frame-relay map ip 172.16.100.6 101 broadcast
> > frame-relay interface-dlci 101
> > frame-relay lmi-type cisco
> > clns router isis
> > !
> > router isis
> > net 01.0000.0000.0005.00
> > !
> >
> ############################################################
> >
> >
> >
> > r5#r
> > Codes: C - connected, S - static, I - IGRP, R - RIP,
> > M - mobile, B - BGP
> > D - EIGRP, EX - EIGRP external, O - OSPF, IA
> > - OSPF inter area
> > N1 - OSPF NSSA external type 1, N2 - OSPF
> > NSSA external type 2
> > E1 - OSPF external type 1, E2 - OSPF external
> > type 2, E - EGP
> > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS
> > level-2, ia - IS-IS inter
> > area
> > * - candidate default, U - per-user static
> > route, o - ODR
> > P - periodic downloaded static route
> >
> > Gateway of last resort is not set
> >
> > 172.16.0.0/16 is variably subnetted, 6 subnets,
> > 5 masks
> > C 172.16.135.0/28 is directly connected,
> > Ethernet0
> > C 172.16.56.0/29 is directly connected,
> > Dialer0
> > i L2 172.16.30.0/25 [115/30] via 172.16.100.6,
> > Serial0
> > C 172.16.5.0/24 is directly connected,
> > Loopback0
> > C 172.16.100.0/27 is directly connected,
> > Serial0
> > i L1 172.16.86.0/24 [115/20] via 172.16.100.6,
> > Serial0
> > r5#
> > r5#r
> > Codes: C - connected, S - static, I - IGRP, R - RIP,
> > M - mobile, B - BGP
> > D - EIGRP, EX - EIGRP external, O - OSPF, IA
> > - OSPF inter area
> > N1 - OSPF NSSA external type 1, N2 - OSPF
> > NSSA external type 2
> > E1 - OSPF external type 1, E2 - OSPF external
> > type 2, E - EGP
> > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS
> > level-2, ia - IS-IS inter
> > area
> > * - candidate default, U - per-user static
> > route, o - ODR
> > P - periodic downloaded static route
> >
> > Gateway of last resort is not set
> >
> > 172.16.0.0/16 is variably subnetted, 5 subnets,
> > 4 masks
> > C 172.16.135.0/28 is directly connected,
> > Ethernet0
> > C 172.16.56.0/29 is directly connected,
> > Dialer0
> > C 172.16.5.0/24 is directly connected,
> > Loopback0
> > C 172.16.100.0/27 is directly connected,
> > Serial0
> > i L1 172.16.86.0/24 [115/20] via 172.16.100.6,
> > Serial0
> >
> > Bradford Hung
> >
> > Pacific Century CyberWorks
> > Tel: 288 33125
>
>
> __________________________________________________
> Do you Yahoo!?
> Y! Web Hosting - Let the expert host your web site
> http://webhosting.yahoo.com/
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:54 GMT-3