From: Joseph Hao (jthao1@hotmail.com)
Date: Tue Oct 22 2002 - 20:24:33 GMT-3
I am scheduled for a CCIE Security Lab in SJ on Dec 2, 2002, but I can not
make it. Anybody wants to swap? Any date on Dec or Jan or Feb is good.
Joseph
----- Original Message -----
From: "Christopher M. Heffner" <cheffner@certified-labs.net>
To: <jim.phillipo@guardent.com>; <troy@onenet.net>; <kkeen@bigpond.net.au>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, October 22, 2002 6:37 PM
Subject: RE: 3550 BGP Issue
> Also just looked up on Cisco website in the release notes and you will
> need the latest greatest version, 12.1(11)EA1 code. BGP supported was
> added as of this version. Not available in the prior releases.
>
> Hope this helps.
>
> Christopher M. Heffner, CCIE, CCSI
> Strategic Network Solutions, Inc.
> cheffner@certified-labs.net
>
>
> -----Original Message-----
> From: jim.phillipo@guardent.com [mailto:jim.phillipo@guardent.com]
> Sent: Tuesday, October 22, 2002 11:31 AM
> To: troy@onenet.net; kkeen@bigpond.net.au
> Cc: ccielab@groupstudy.com
> Subject: RE: 3550 BGP Issue
>
> I was running a older version of IOS that did not support BGP. I
> upgraded
> this morning and am up and running.
>
> Thanks to all those who responded.
>
> -----Original Message-----
> From: Troy Rader [mailto:troy@onenet.net]
> Sent: Monday, October 21, 2002 8:57 PM
> To: Kris Keen
> Cc: Jim Phillipo; ccielab@groupstudy.com
> Subject: Re: 3550 BGP Issue
>
>
> I am running BGP on a 3550 with EMI on this version of IOS:
> c3550-i5q3l2-mz.121-11.EA1.bin.
>
> Do you have 'ip routing' enabled? Just a guess. I haven't tried it.
>
> Troy
>
>
> Kris Keen wrote:
>
> >I dont believe BGP is a supported protocol just yet, there was
> discussion
> on
> >this earlier, further releases of IOS will bring BGP to be a supported
> >protocol, Check CCO
> >
> >Cheers
> >Kris
> >----- Original Message -----
> >From: <jim.phillipo@guardent.com>
> >To: <ccielab@groupstudy.com>
> >Sent: Tuesday, October 22, 2002 9:29 AM
> >Subject: 3550 BGP Issue
> >
> >
> >
> >
> >>Whats up with this ?
> >>
> >>It appears that the command is ok but it will not take it ?
> >>
> >>cat1#conf t
> >>Enter configuration commands, one per line. End with CNTL/Z.
> >>cat1(config)#router bgp ?
> >> <1-65535> Autonomous system number
> >>
> >>cat1(config)#router bgp 4799 ?
> >> <cr>
> >>
> >>cat1(config)#router bgp 4799
> >>Unknown routing protocol
> >>cat1(config)#
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:54 GMT-3