From: dburnett (dburnett@click1.net)
Date: Mon Oct 21 2002 - 17:54:08 GMT-3
Try the global command "sdm prefer vlan", save to nvram and reload. This
command requires a reload. See what happens. I'm still waiting on the two
3550s I've ordered so I will be interested in the outcome myself.
Darrell Burnett
----- Original Message -----
From: "Chris Cole" <CCole@EPLUS.com>
To: "'LoizosCisco'" <david_steven2001@yahoo.com>; <ccielab@groupstudy.com>
Sent: Monday, October 21, 2002 2:50 PM
Subject: RE: 3550 BVI/router on a stick problem any solutions
> Loizos, On the 3550 that i have used, the ip routing is disabled by
default.
> I also tried to give the no ip routing in globla. I can ping the router
that
> is doing the trunking and bridging but can't get to the other subinterface
> on the same network. It's vary strange. It does work when I port the same
> routers to a 2924XL and just do a clear arp. Bing-Go it works. Put it back
> on the 3550 and no go. I was reading the thread and I have the same
> equipment and wanted to give it a try.
>
> Thank you for you input.
>
> Chris
>
> -----Original Message-----
> From: LoizosCisco [mailto:david_steven2001@yahoo.com]
> Sent: Sunday, October 20, 2002 8:30 PM
> To: Chris Cole; 'Chris Young'; 'ccielab@groupstudy.com'
> Subject: RE: 3550 BVI/router on a stick problem any solutions
>
>
> Chris,
>
> You probably using an EMI image. Since you using the
> 3550 as a L2 switch you might have to disable routing
> (no ip routing). For some reason the default gateway
> does not work with EMI L3.
>
> Try it out and let me know
>
>
> Loizos
>
>
> --- Chris Cole <CCole@EPLUS.com> wrote:
> > Chris, I have a 3550 isl trunk into a 2600. the 3550
> > has a management Vlan 5
> > that need to be bridged over to vlan 6 in the same
> > subnet. On the 2600 I
> > have irb bridging, sub interfaces, bridge-group **,
> > int BVI**. It does work,
> > but I can't ping the management interface. What I
> > mean by work is : if I set
> > another interface on the 3550 to say vlan 5 on the
> > same subnet as vlan 6,
> > the host to host can ping. But not the management
> > interface. I took the same
> > config over to a 2924 and bing-go it works. So it's
> > some thing with the
> > management Vlan on the 3550. I also made a loopback
> > put it in vlan 5 same
> > subnet and no go, not pinging.. My post was in
> > reference to all the other
> > posts on the same subject. I thought it a waste of
> > time to restate what had
> > been stated many times before. I was just wondering
> > if any body came up with
> > a answer yet. From the last post it look like you
> > had to remove a line about
> > native vlan but my configs do not have such a line.
> >
> >
> >
> > isl trunk
> > 3550vlan5-----| irb int bvi **
> > |---------2600
> > hostvlan6-----|
> >
> >
> >
> >
> > -----Original Message-----
> > From: Chris Young [mailto:csyoung@speakeasy.net]
> > Sent: Friday, October 18, 2002 6:59 PM
> > To: Chris Cole; ccielab@groupstudy.com
> > Subject: RE: 3550 BVI/router on a stick problem any
> > solutions
> >
> >
> > Chris,
> >
> > What problem are you referring to specifically? I
> > must have missed that
> > message.
> >
> > Chris
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com] On Behalf Of
> > Chris Cole
> > Sent: Friday, October 18, 2002 5:13 PM
> > To: ccielab@groupstudy.com
> > Subject: 3550 BVI/router on a stick problem any
> > solutions
> >
> > I have this problem also. I have look through all
> > the archives to make
> > sense
> > of this. All I've come up with is it shows up as
> > Incomplete in the "sh
> > arp."
> >
> > Chris
>
>
> __________________________________________________
> Do you Yahoo!?
> Y! Web Hosting - Let the expert host your web site
> http://webhosting.yahoo.com/
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:53 GMT-3