From: Neil Moore (neil@droopy.com)
Date: Mon Oct 21 2002 - 10:01:15 GMT-3
You can also do a NAT with an access-list of port 23. I do not know if you
have other interfaces that packets might travel out of from your config
below.
Neil Moore CCIE #10044
----- Original Message -----
From: "Bill jegcitroen" <jegcitroen@hotmail.com>
To: <id353@singnet.com.sg>
Cc: <ccielab@groupstudy.com>
Sent: Monday, October 21, 2002 12:04 AM
Subject: Re: telnet source address
> Hi Ron,
>
> Thanx a lot. But I don't think it will work.
>
> when the "ip telnet sour" or "telnet host /sour" commands r used, the
router
> will
> use the address of the closest interface to the destination as the source
> address.
>
> but my scenario is shown as follow:
> #sh ru int e0
> !
> interface Ethernet0/0
> ip address 10.0.0.231 255.255.255.0 secondary
> ip address 10.0.0.254 255.255.255.0
> no ip redirects
> no ip directed-broadcast
> no ip proxy-arp
> ip nat inside
>
> I wanna use 10.0.0.231 as the source ip address, how could I do?
>
> 8-(
>
>
>
> >From: Ron <id353@singnet.com.sg>
> >To: "Bill jegcitroen" <jegcitroen@hotmail.com>, ccielab@groupstudy.com
> >Subject: Re: telnet source address
> >Date: Sun, 20 Oct 2002 20:01:11 -0700
> >
> >ip telnet source-interface
> >
> >Allows a user to select an address of an interface as the source address
> >for Telnet connections.
> >
> >Ron
> >
> >From Bill jegcitroen <jegcitroen@hotmail.com> on 20 Oct 2002:
> >
> > > Hi Guys,
> > >
> > > How can I telnet to a host using the secondary address of an interface
> > > instead of the primary ip address?
> > >
> > > Thanx in advance
> > >
> > > - Jegcitroen
> > >
> > >
> > >
> > > _________________________________________________________________
> > > Broadband? Dial-up? Get reliable MSN Internet Access.
> > > http://resourcecenter.msn.com/access/plans/default.asp
> > >
>
>
> _________________________________________________________________
> Get faster connections -- switch to MSN Internet Access!
> http://resourcecenter.msn.com/access/plans/default.asp
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:52 GMT-3