From: Peng Zheng (zpnist@yahoo.com)
Date: Sat Oct 19 2002 - 23:29:55 GMT-3
I don't know. But same LDN is default configuration
and it works well now. I don't know if it's because
I'm using ISDN simulator.
--- kym blair <kymblair@hotmail.com> wrote:
> Peng,
>
> For DMS-100 you can have the same LDN and SPID on
> both B Channels, but I
> think for NI-1 your LDNs should be different, but
> compatible with the SPIDs.
> Try the following:
>
> >Port A: Phone 1: 4081111111
> >Phone 2: 4081111112
> >Spid 1: 0408111111101
> >Spid 2: 0408111111201
> >Port B: Phone 1: 4082222221
> >Phone 2: 4082222222
> >Spid 1: 0408222222101
> >Spid 2: 0408222222201
>
> >on R1, I config:
> >isdn switch basic-ni1
> >interface bri0
> >ip address 192.168.200.1 255.255.255.0
> >isdn spid1 0408111111101 4081111111
> >isdn spid2 0408111111201 4081111112
> >dialer map ip 192.168.200.2 name R2 4082222221
> broad
> >dialer-group 1
> >
> >dialer-list 1 protocol ip permit
> >
> >
> >On R2:
> >
> >isdn switch basic-ni1
> >interface bri0
> >ip address 192.168.200.2 255.255.255.0
> >isdn spid1 0408222222101 4082222221
> >isdn spid2 0408222222201 4082222222
> >dialer map ip 192.168.200.1 name R1 4081111111
> broad
> >dialer-group 1
> >
> >dialer-list 1 protocol ip permit
>
> Please let us know if you succeed using the same LDN
> on phone1 and phone 2
> (i.e., 4081111111 on both channels of port A and
> 4082222222 on both channels
> of port B).
>
> Also, at Networkers 2002 Cisco said to always add
> chap to help the routers
> resolve who is on the other end:
>
> (global) username R2 password cisco (R2 is the
> remote router hostname)
> (bri0/dialer0) encap ppp
> (bri0/dialer0) ppp auth chap
>
> HTH, Kym
>
>
>
>
>
> >From: Phil <ciscostudent1@yahoo.com.br>
> >Reply-To: Phil <ciscostudent1@yahoo.com.br>
> >To: Peng Zheng <zpnist@yahoo.com>,
> ccielab@groupstudy.com
> >Subject: Re: ISDN simulator
> >Date: Sat, 19 Oct 2002 13:45:56 -0300 (ART)
> >
> >Shouldn't each port have 2 different phone numbers
> as well as spid numbers?
> >
> >Phil
> >
> >
> >
> > Peng Zheng <zpnist@yahoo.com> wrote:I got a ISDN
> simulator from Vconsole.
> >I use two 2520
> >to connect throught bri 0. I connect bri0 to ISDN
> >simulator through straight-through cable. I leave
> the
> >default setup:
> >Both ports use ni-1
> >Port A: Phone 1: 4081111111
> >Phone 2: 4081111111
> >Spid 1: 40811111111
> >Spid 2: 40811111112
> >Port B: Phone 1: 4082222222
> >Phone 2: 4082222222
> >Spid 1: 40822222221
> >Spid 2: 40822222222
> >
> >Port A connect to R1 and Port B to R2.
> >
> >on R1, I config:
> >isdn switch basic-ni1
> >interface bri0
> >ip address 192.168.200.1 255.255.255.0
> >isdn spid1 40811111111 4081111111
> >isdn spid2 40811111112 4081111111
> >dialer map ip 192.168.200.2 name R2 4082222222
> broad
> >dialer-group 1
> >
> >dialer-list 1 protocol ip permit
> >
> >
> >On R2:
> >
> >isdn switch basic-ni1
> >interface bri0
> >ip address 192.168.200.2 255.255.255.0
> >isdn spid1 40822222221 4082222222
> >isdn spid2 40822222222 4082222222
> >dialer map ip 192.168.200.1 name R1 4081111111
> broad
> >dialer-group 1
> >
> >dialer-list 1 protocol ip permit
> >
> >When I use show isdn status, I got:
> >
> >Global ISDN Switchtype = basic-ni
> >ISDN BRI0 interface
> >dsl 0, interface ISDN Switchtype = basic-ni
> >Layer 1 Status:
> >ACTIVE
> >Layer 2 Status:
> >TEI = 255, Ces = 1, SAPI = 0, State =
> >ESTABLISH_AWAITING_TEI
> >TEI Not Assigned, ces = 1, state = 3(await
> >establishment)
> >spid1 configured, spid1 NOT sent, spid1
> >NOT valid
> >TEI Not Assigned, ces = 2, state = 1(terminal
> >down)
> >spid2 configured, spid2 NOT sent, spid2
> >NOT valid
> >Layer 3 Status:
> >0 Active Layer 3 Call(s)
> >CCB:callid=0, sapi=0, ces=1, B-chan=0,
> >calltype=INTERNAL
> >Active dsl 0 CCBs = 1
> >The Free Channel Mask: 0x80000003
> >Total Allocated ISDN CCBs = 1
> >
> >At the beginning, one of them worked. But now, I
> got
> >this info on both of them.
> >
> >
> >Does anyone know what's the problem?
> >
> >
> >Thank you for help.
> >
> >Best Wishes,
> >Peng Zheng
> >
> >
> >
> >
> >
> >
> >__________________________________________________
> >Do you Yahoo!?
> >Y! Web Hosting - Let the expert host your web site
> >http://webhosting.yahoo.com/
> >
> >
> >---------------------------------
> >Yahoo! GeoCities
> >Tudo para criar o seu site: ferramentas faceis de
> usar, espago de sobra e
> >acesssrios.
>
>
>
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:52 GMT-3