From: Sage the IP Monkey (the_ip_monkey_goes_bananas@hotmail.com)
Date: Fri Oct 18 2002 - 22:01:07 GMT-3
Martin,
I have tried this before to no avail.
rgds,
Sage
----- Original Message -----
From: "MOLINA, MARTIN J (PBI)" <mm1343@sbc.com>
To: "'Sage the IP Monkey'" <the_ip_monkey_goes_bananas@hotmail.com>;
<ccielab@groupstudy.com>
Sent: Saturday, October 19, 2002 10:44 AM
Subject: RE: Redistribute static in OSPF
I'm guessing but try adding the "subnets" keyword to your "redistribute
static" command entry. Good luck
-----Original Message-----
From: Sage the IP Monkey [mailto:the_ip_monkey_goes_bananas@hotmail.com]
Sent: Friday, October 18, 2002 5:30 PM
To: ccielab@groupstudy.com
Subject: Redistribute static in OSPF
Dear all,
Have a weird issue with redistribute static in OSPF.
Router3-------------------Router4
Point to point serial interfaces, encap ppp,
clock rate 5600. Int's are UP/UP.
Router3 IP = 173.168.40.1
Router4 IP = 173.168.40.2
They have default static's pointing to each other -
ip route 0.0.0.0 0.0.0.0 x.x.x.x
Under the OSPF process I configured:
redistribute static metric 500 metric-type 1
Output of show ip route on Router3:
Gateway of last resort is 173.168.40.2 to network 0.0.0.0
173.168.0.0/24 is subnetted, 1 subnets
C 173.168.40.0 is directly connected, Serial1
S* 0.0.0.0/0 [1/0] via 173.168.40.2
But whe I issue a - show ip ospf data/show ip route ospf
the network is not there. Q) What am I missing here?
I got this config to work before, but now am not sure what
I have messed up with.
If you need more outputs/info email me.
rgds,
Sage
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:51 GMT-3