From: Privat\ ("Erling)
Date: Fri Oct 18 2002 - 06:33:36 GMT-3
Hi,
look at following link
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/icsbgp4.htm#xtocid2043934
where it is stated:
Route Map Filtering
The neighbor route-map router configuration command can be used to apply a route map to incoming and outgoing routes.
--------------------------------------------------------------------------------
Note The neighbor route-map command has no effect on incoming updates when matching is based on IP address.
--------------------------------------------------------------------------------
You can find the document on the UniverCD at 'Internetworking Case Studies' and then 'Using the Border Gateway Protocol for Interdomain Routing'.
Regards
Erling Bjontegard
----- Original Message -----
From: "Nathan Chessin" <nchessin@cisco.com>
To: <ccielab@groupstudy.com>
Sent: Friday, October 18, 2002 7:09 AM
Subject: BGP inbound route-map
> Hi all,
>
> Is it still true that you can not filter inbound BGP updates with a
> route-maps that matches on ip address in the BGP neighbor command?
>
>
> Nate
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:50 GMT-3