From: LoizosCisco (david_steven2001@yahoo.com)
Date: Thu Oct 17 2002 - 19:34:48 GMT-3
I have used ppp multilink before (with 2 and 4 T1
lines). You have to be carefull with router CPU. If
you using a 3600 or lower then you must check with
cisco for IOS recomendations, which depend on the
routing protocol you use. PPP multilink will load
balance traffic very nicely. If you graph the traffic
on both T1s you will see the same amound of traffic in
both.
Have not used FRF.16. Does it load balance?
Loizos
--- Sam Munzani <sam@zealtron.com> wrote:
> Group,
>
> I have 2 T1 circuits between 2 locations. What's
> better configuration?
> Multilink PPP or FRF.16(After doing back to back
> Frame Relay?)
>
> Thanks,
> Sam Munzani
>
> CCIE # 6479
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:50 GMT-3