From: Diment, Andrew (adiment@qwest.com)
Date: Thu Oct 17 2002 - 17:15:46 GMT-3
I've been searching for a good clear example of this type of config (edge
routers and ones in the middle). Does anyone have any links or examples?
Thanks,
-----Original Message-----
From: Larson, Chris [mailto:CLarson@usaid.gov]
Sent: Wednesday, October 16, 2002 1:12 PM
To: 'Jay'; ccielab@groupstudy.com
Subject: RE: RSVP question
To simulate a system requesting reservation you need to do the rsvp sender
and reservation commands on the edge routers. For RSVP to work in the real
world, yes it must be configured on all routers along the path. That is my
understanding.
> -----Original Message-----
> From: Jay [SMTP:ccienxtyear@hotmail.com]
> Sent: Wednesday, October 16, 2002 1:31 PM
> To: ccielab@groupstudy.com
> Subject: RSVP question
>
> Hi,
>
> When you configure RSVP, does this need to be enabled on all routers along
> the
> path of source to destination. If I have 3 routers, does rsvp needs to be
> enabled on all 3 routers in/out interfaces. Also, is the ip rsvp sender
> and ip
> rsvp reservation commands needed on the edge routers.
>
> thanks,
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:50 GMT-3