From: MOLINA, MARTIN J (PBI) (mm1343@sbc.com)
Date: Thu Oct 17 2002 - 05:14:52 GMT-3
Thanks to everybody who replied. The CB-WFQ looks pretty cool and I haven't
had a chance to fool around with it. The scenario I'm working on
specifically calls for Custom Queuing. I have no problem with figuring out
byte-counts for the queues when the average packet sizes for each protocol
are given. The vendor's solution appears to use 1024 bytes as opposed to the
1500 byte default. They assigned 4096 bytes to the IP queue and 1024 bytes
to the Telnet queue(40% and 10%). Thanks again,
-----Original Message-----
From: Ray Masbad [mailto:rmasbad@sbcglobal.net]
Sent: Wednesday, October 16, 2002 8:23 PM
To: MOLINA, MARTIN J (PBI)
Cc: 'ccielab@groupstudy.com'
Subject: Re: Custom Queuing without average packet sizes
Martin,
I believe the default byte count is 1500 bytes.
MOLINA, MARTIN J (PBI) wrote:
>Howdy,
>I'm working out of a certain vendors' workbook and they never specify the
>average packet sizes for Custom Queuing. Does anyone have a good formula
for
>deriving the custom queue byte count when the average packet sizes are not
>given?
>
>Example:
>IP traffic will use 40%
>TELNET will use 10%
>
>Martin Molina
>Senior Network Engineer
>CCNP CCDP
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:49 GMT-3